Table of Contents
Advertisement
4.4.3 REMOTE SOFTWARE SETUP
INSTALLING REMOTE SOFTWARE
1.
On the client computer, insert the Digital Watchdog Software CD into the CD-ROM. The CD should play automatically.
2.
When prompted, select the Install Remote Software option. Follow the installation instructions carefully.
3.
When the software finishes installing, close any open installation windows.
CREATING A NEW REMOTE CONNECTION
1.
Select Start > Programs > Digital Watchdog > Remote > Digital Watchdog Remote Center. The Digital Watchdog Remote Software
opens, and the Local Connection window opens.
2.
Click New to open the Site Info window.
3.
Select the Site Type and enter a Site Name. The Site Name will be the name displayed inside the connection box to help identify the
unit.
4.
Enter the IP Address of the NVR server. By default, the NVR is set to connect using DHCP.
5.
Enter the Center Port. This setting is specified on the server.
6.
Click OK.
7.
Click on the newly created Site and enter the login Username and Password (case sensitive).
8.
Click Connect.
Nexus Manual 022012 | 77
Advertisement
Table of Contents
