Face Stamp Software Set-Up - Digital Watchdog Vmax960-8 User Manual

9 FACE STAMP S
Independent Face Stamp SW is supplied in the DVR's accessory CD to manage the face stamp events search, various
reports, user management and work hour calculation.

9.1 Face Stamp Software Set-up

9.1.1 System Connection Info
In order to operate this S/W after installation, access the target VMAX960H or VMAX960H Flex. Input the DVR's IP address,
Port No, DVR login ID and pass word to connect. See section 4.4 Network for more information.
After login the S/W, employee information and event data will be synchronized automatically.
1. Click Login button.
2. Enter the DVR's IP, Port, ID and Password to connect.
*Check 'Connect Success' on Log View.
9.1.2 Work Schedule Setup
A The FaceStamp software allows you to setup multiple working schedules. To setup a working schedule:
1. Press the
2. Enter start & end time for the day.
3. If applicable, enter a break hour time.
4. Press OK. the hours will appear on the
day you setup. You can copy this working
schedule to other days by pressing 'Copy'.
5. When all setup is complete, click 'Save As' to name and save the working schedule.
OFTWARE
button.
User's Manual | 122