Using The Bluetooth Cellular Phone - JVC KW-AVX820 Instructions Manual

Using the Bluetooth cellular phone _
Status of the device
• Signal strength/Battery remainder (only when
the information comes from the device).
Connected device name
. I
or 'appears
depending on the device
connected.
• When no audio device is
connected, "No Audio
Device" appears.
Activates
<Voice Dialing>
function. (Hold)
• To cancel
<Voice Dialing>,
hold any button on the
monitor panel (except
01
ATT
orVOL+/-).
• Displays
<Dial Menu>
screen.
• Displays
<Redial>
menu. (Hold)
Bluetooth icon
• Turns blue when aBluetooth device is
connected.
o
Press [SOURCE], then press [BLUETOOTH].
8
Press
[~]
or MENU.
• Press [Bluetooth].
• Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu).
(~
25 - 28)
When a call comes in•••
The source is changed to "Bluetooth" automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated•••
The unit answers the incoming call automatically.
(~27)
42
When <Auto Answer> is deactivated..•
To answer the incoming call
• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
O/ATT
orVOl +/-).
To end the call
• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
C>/ATT
orVOl +/-).
• You can adjust the microphone volume,
~
28.