Display Screen - JVC KW-AVX820 Instructions Manual

*11
The REVERSE GEAR SIGNAL lead connection is required. See Installation/Connection Manual. The rear view through
the camera appears on the screen in
<Full>
aspect ratio (regardless ofthe aspect ratio setting) when you shift the
gear to the reverse (R) position. When you press DISP on the monitorpanel, or when you shift the gear to another
position other than the reverse (R) position, the rear view screen is cleared.
*
12
While the pictures through the camera are shown on the monitor, no message will be displayed.
*
13
Not selectable when the component connected to the CD changerjack is selected as the source.
*14
The name ofthe component detected through the CD changerjack is shown.
*15
The TEL MUTING lead connection is required. See Installation/Connection Manual.
Ex.: When storing into
<User2>.
3
Make the setting, then store.
• Storing your own adjustments
You can store your adjustments into
<Userl >,
<User2>,
and
<User3>.
1
Display <AV Menu> screen.
Ir!~
i
r
2
Display <Equalizer> screen.
Makes adjustments by
moving each bar directly.
Preset equalizing values
Moves to the other 6
sound modes.
Selects apreset sound mode suitable to the music
genre.
• Flat
(Initial),
Hard Rock, R&B, Pop, Jazz, Dance,
Country, Reggae, Classic, Userl, User2, User3
AV MENU
19