Bluetooth - Mobile Phone - JVC KD-SX38MBT Instruction Manual

Bluetooth®
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE] on page 15.
• A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see [PHONE SELECT] or [AUDIO SELECT] in [BT MODE]. (Page 15)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page 17)
• Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
• When the battery of the connected Bluetooth device runs low, "Device
Name" "LOW BATTERY" appears.
• Refer to the instruction manual of the Bluetooth device for more
information.
12 ENGLISH
KD-SX38MBT_K_B5A-4237-00_EN_1st Draft.indd 12 KD-SX38MBT_K_B5A-4237-00_EN_1st Draft.indd 12
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
• The buttons will blink in the color you have selected in [RING COLOR].
(Page 14)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 14)
During a call:
• The buttons stop blinking and illuminate in the color you have selected in
[RING COLOR]. (Page 14)
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
27/4/2022 12:01:09 PM 27/4/2022 12:01:09 PM