JVC KW-AVX820 Instructions Manual page 18

.On
• Audio
.iPod(Off)
• Navigation
• Audio&Video
You can determine the use of LINE IN and VIDEO IN plugs.
(~
50)
• Off
Select when no component is connected
("AV-IN"
is skipped while selecting the source).
Select when connecting the iPod/iPhone using the
USB Audio and Video cable for iPod/iPhone.
(~
48)
: Select when connecting an AV component such as
aVCR.
: Select when connecting an audio component such
as aportable audio player.
: Select when connecting aNavigation System.
(~
50)
Camera Input
*11, *12
For connecting arear view camera to the CAMERA IN plug on the rear.
• Off :
Select when no rear view camera is connected to
the CAMERA IN plug.
: Select when connecting the rear view camera to
the CAMERA IN plug. The picture from the camera
is displayed as it is taken.
-
: :I
CL.
.s
External Input
*13
For connecting an external component to the CD changer jack on the rear.
• For connecting Satellite radio interface and Smart Digital Adapter, this
setting is not reqUired. They are automatically detected.
• Changer/iPod
*14 :
CD changer,
(~
44), iPod,
(~
49).
• External :
Any other than the above,
(~51).
Beep
• Off :
Cancels.
• On : Activates the key-touch tone.
Telephone Muting
*15 •
Off : Cancels.
• Mutingl, :
Select either one which mutes the sounds while
Muting2
using the cellular phone.
Always light.
Monitor panel buttons light up when your finger
moves closer to the touch panel.
Monitor panel buttons light up when your finger
touches the touch panel.
..
(II
.c
o
Illumination You can turn off the lights of the monitor panel buttons while turning on the
unit.
(~7)
• Normal
• Proximityl
Motion
• Tou(h Panel
Motion Sensitiv.
Change the sensitivity of the sensor for
<Illumination>
(above).
• Low, Mid, High
Initialize
Initialize all settings you have made in
<AV Menu>.
Press and hold
[Enter]
to initialize the settings, then reset the unit.
(~
3)
*10
Not selectable when
"AV-IN"
is selected as the source.
18