JVC KW-AVX820 Instructions Manual page 17

Select this when connecting an amplifier or adecoder
incompatible with Dolby Digital or MPEG Audio, or when
connecting to arecording device.
Select this when connecting an amplifier or adecoder
compatible with Dolby Digital.
Select this when connecting an amplifier or adecoder
compatible with Dolby Digital or MPEG Audio.
• Stream
• DolbyD
When playing back amulti-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
• Dolby Surr.
Select this to enjoy multi-channel surround audio
by connecting an amplifier compatible with Dolby
Surround.
• Stereo Normally select this.
Select the signal format emitted through the DIGITAL OUT (optical) terminal.
(~58)
.PCM
Down
Mix*7
D. (Digital) Audio
Output
*7
Select to apply the effect to multi-channel encoded
software.
Select to always use this function.
D. (Dynamic)
Range Compres.
(Compression)
*7
You can enjoy apowerful sound at alow volume level while playing Dolby
Digital software.
• Auto
When using in North/Central/South America. FMIAM
intervals are set to 200 kHzllO kHz.
When using in any other areas. FMIAM intervals are set
to 50 kHz (100 kHz during auto search)/9 kHz.
When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10kHz.
• Europe
.SA
• Wide
IF Band Width
Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may be
lost.)
Subject to the interference from adjacent stations, but
sound quality will not be degraded and the stereo effect
_ i ' -
-+-
w_ill_re_m_a_in_. _
t
Area Setting
c
=
. ...
Sirius
10*9
Your SIRIUS identification number appears on the monitor.
*9
Appears only when aSIRIUS Satellite Radio is connected.
Continued on the nextpage
AV MENU
17