Looking Up Information; Changing The Display Settings - Jura Capresso Impressa J5 Operating Instructions And Warranty

• If you use the machine all day change the setting to the largest
use interval, e.g. 4 hours. This way the machine is always
ready to brew coffee.
Changing the AUTO-OFF setting:
READY,
• Push and hold the rotary dial until the display shows RINSE.
• Turn the dial clockwise until the display shows
• Push the rotary dial. The display shows
• Turn the dial to set desired setting and push the dial to confirm.
For two seconds the display shows
• Turn the rotary until the display shows EXIT.
• Push the rotary dial. READY.

17.7 LOOKING UP INFORMATION

The J5 lets you check...
• how many cups of coffee you made total and individually for
each beverage button including the ground coffee funnel,
• how often you used the steam and hot water button,
• how how often you de-scaled the machine,
• how how often you ran a tablet cleaning cycle (CLEAN)
• how how often the filter was changed/activated.
It will also indicate if descaling, tablet cleaning or filter change
will be due soon.
READY.
• Push and hold the rotary dial until the display shows RINSE.
• Turn the dial clockwise until the display shows INFO.
• Push the rotary dial. The display shows BUTTONS.
• Turn the dial to select from the following sub-programs:
BUTTONS, DE-SCALE, CLEAN,
up, if a Clearyl filter is activated), EXIT.
AUTO OFF.
2 HRS.
OK and then AUTO OFF.
FILTER (Filter will only come
Example: You would like to know how often the 1-Espresso
button was used.
• INFO. Turn the dial until the display shows BUTTONS.
• Push the dial. The display will show the total number of coffees
made, e.g. 36.
• Now push the 1-cup Espresso button. The display will show
how often this button was used, e.g. 12.
• Push the dial again. The display shows BUTTONS.
• Turn the dial until the display shows EXIT.
• Push the button. The display shows INFO.
• Turn the dial until the display shows
READY.

17.8 CHANGING THE DISPLAY SETTINGS

This function lets you select the time format AM/PM or 24HRS
format and the volume either in ounces OZ or milliliters ML.
READY.
• Push and hold the rotary dial until the display shows RINSE.
• Turn the dial clockwise until the display shows DISPLAY.
• Push the rotary dial. The display shows
• Turn the dial to choose from
EXIT.
To change the coffee volume display from OZ to ML,
chose ML / OZ and push the dial. OZ.
• Turn the dial to select
seconds the display shows
• Turn the dial to EXIT and push. The the display shows
PLAY.
• Turn the dial until EXIT
27.
EXIT and push the dial.
ML/OZ.
24 H / AM PM or ML / OZ
ML and push to confirm. For two
OK and then it shows
and push the dial. READY.
or
ML / OZ.
DIS