Table of Contents
Advertisement
Drain hose
Drain hose
support (1)
joiner (1)
Phillips
Rubber washer
16 mm
for inlet hose (1)
screws (9)
(comes already
fitted)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 3.6 m.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
2
PArtS SUPPLied
Wire clip (2)
(for securing
Drain hose joiner)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
Clamp (1)
(for securing
Drain hose joiner)
Hexagonal
socket for feet
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
Prefinished
toekick (1) and
securing pins (4)
Top
mounting
brackets (2)
OPTIONAL
3
Hide quick links:
Advertisement
Table of Contents
