Canon IPF850 User Manual page 379

iPF850
Removing the Stacker From the Printer
If the Stacker is installed on the printer when paper is loaded in the printer or when ejecting to the Output Stacker,
remove the Stacker from the printer using the following procedure.
1
Turn the Stacker off.
2
Check that the Stacker Canopy (a) is closed, and then un-
lock all of the casters on the Stacker stand.
•
If the Stacker contains printed documents, open the Canopy and clear away all of the printed docu-
ments, then close the Canopy. If you move the Stacker while it still contains paper, the printed docu-
Important
ments may become scratched or misaligned and the next ejection may not be performed properly.
3
Holding the Stacker outer frame (a), pull the Stacker and
remove it away from the printer.
User's Guide
Installing and Removing the Stacker On the Printer
a
O F F
a
379