Printing By Automatically Switching Between Upper And Lower Roll Paper; Printing By Automatically Switching Between Upper And Lower Roll Paper (Windows) - Canon IPF850 User Manual

Printing by Automatically Switching Between Upper and Lower Roll Paper

Example of paper to load 2
Paper source
Upper
Lower
•
Important
•
For details on how to load roll paper in the printer, see "Handling rolls."
•
Note
If roll paper of different widths and different types are loaded in the upper and lower rolls, printing is per-
formed on the roll paper that matches the media types specified in the print job.
Since errors may occur or printing may be performed on the unintended roll depending on the settings, it is
recommended in this case that you print by specifying the better suited roll paper 1 or roll paper 2 without
using double-roll switching.
•
For more information on how the paper sources are switched, see "Roll Paper Switching Method."
Printing by Automatically Switching Between Upper and Lower Roll Paper
Printing by Automatically Switching Between Upper and Lower Roll Paper
Prints by automatically switching between roll paper 1 and roll paper 2 depending on the type of media and size
specified in the print job.
For details, refer to the following topics depending on the operating system you are using.

Printing by Automatically Switching Between Upper and Lower Roll Paper (Windows)

•
Printing by Automatically Switching Between Upper and Lower Roll Paper (Mac OS)
•
Printing by Automatically Switching Between Upper and Lower Roll Paper (Windows)
Printing by Automatically Switching Between Upper and Lower Roll Paper (Windows)
This section describes how to print by automatically switching between roll paper 1 and roll paper 2 depending on
the print job.
Normally, refer to Basic Printing Method
If you want to print by reducing as much margin of roll paper as possible, refer to Method of Conserving More Pa-
per . In this case, you need to load roll paper of the same media type in the upper and lower rolls.
P.34
➔
•
If you set Set./Adj. Menu>System Setup>Roll Switching to No RollSwitching in the control panel, printing
may be performed on the unintended roll paper. It is recommended that you set this setting to Use Optimal Size
Important
in advance.
•
Double-roll switching cannot function if roll paper of a media type that cannot be automatically cut is fed to the
platen.
For information on support for automatic cutting, refer to Paper Reference Guide. (See "Displaying the Paper
Reference Guide.")
32
Roll Paper Width
36-in. Roll (914.4 mm) Plain Paper
A1/A2 Roll (594.0 mm) Canon Coated Paper
Double-roll switching cannot function if roll paper of a media type that cannot be automatically cut is fed to
the platen.
For information on support for automatic cutting, refer to Paper Reference Guide. (See "Displaying the Pa-
per Reference Guide.")
P.335
➔
P.33
➔
P.335
➔
Media Type
.
P.342
➔
➔
P.32
➔
P.37
➔
User's Guide
iPF850
P.39