Function "Synchronize Options" Figure 3.20 - Rorke Data GalaxyNASLX2 Configuration And System Integration Manual

G A L A X Y N A S L X C O N F I G U R A T I O N
Note: To add shares that you want to synchronize, use the function "Choose shares"
Important: Operation of synchronization process requires that you define at least one
snapshot for each volume group that contain shares you want to synchronize. When using
"manual" type of synchronization it is enabled by clicking "apply" on both the source and the
destination mode and precisely in that order.
To disable any synchronization scheme set "synch. mode" to "none" and click "apply"

3.6.2 Function "Synchronize options" Figure 3.20

This function allows you to set additional parameters for synchronize. Available settings are:
•
Log synchronization errors: If you enable this feature every synchronization error will
be logged. If you also enable sending logs via e-mail, the errors will be also be sent
by e-mail. This feature is enabled by default.
•
Synchronize whole files: If you enable this feature, each changed file will be
synchronized in whole instead of just the changed part of file. This feature is disabled
by default.
Figure 3.20
59
A N D S Y S T E M I N T E G R A T I O N G U I D E
Section 3 Menu Functions