Rorke Data GalaxyNASLX2 Configuration And System Integration Manual page 47

G A L A X Y N A S L X C O N F I G U R A T I O N
Port: 21
User: anonymous
Password:
In the GalaxyNASLX2 , the allocation of access rights is done via the IP address of the PC
currently in the process of accessing. A 'read access' is, therefore, granted with typical and
anonymous logins. As a standard, the NAS server for FTP uses port 21, which can be
changed in the configuration menu (under "Setup –> Server").
Figure 3.13
If you use the Internet Explorer when accessing, you need to enter the following data into the
entry line:
ftp://192.168.0.220 or the IP address you have assigned
You are not prompted to enter the user name and password, as the Internet Explorer first
establishes an anonymous connection. If you changed the FTP port, add this information to
the entry line the following way:
ftp://192.168.0.220:4711 (in this example, 4711 represents the new port number).
In order to also grant specific computers write access to the FTP area, enter the desired IP
addresses into the line "IP address complete access" (IP addresses should be separated by
semicolons):
192.168.0.1; 192.168.0.2; 192.168.0.222; etc.
In order to assign the entire address area between 192.168.0.1 and 192.168.0.254 writing
privileges enter:
192.168.0.0/24
In order to assign the entire address area between 192.168.0.1 and 192.168.255.254 writing
privileges enter:
192.168.0.0/16
You may find details on IP calculation in the internet. Just search for "ipcalc".
46
A N D S Y S T E M
123
I N T E G R A T I O N G U I D E
Section 3 Menu Functions