Function "Clock Settings" Figure 3.11 - Rorke Data GalaxyNASLX2 Configuration And System Integration Manual

G A L A X Y N A S L X C O N F I G U R A T I O N
NT 4.0 server add the GalaxyNASLX2 to the Domain
1. Run Server Manager program from Menu Start->Programs->Administrative
Tools(Common)->Server Manager
2. From Server Manager menu select Computer->Add to Domain
WARNING: If the GalaxyNASLX2 is already added, you must remove it
3. In Computer Name field enter the GalaxyNASLX2 Server-Name (NetBIOS name)
4. Click Add button
Set Windows (PDC) in GalaxyNASLX2
1. From the GalaxyNASLX2 web interface select Setup> Server
2. In Function - Authentication method choose Windows (PDC) option
3. In Server IP field enter NT server IP address
4. In Name & Password fields enter administrator account name and password of NT
server
5. Click apply button
WARNING: If connection fails, you must restart from point 1 (setting NT)

3.2.3 Function "Clock settings" Figure 3.11

Here, you can define an NTP server (Network Time Protocol) to synchronize your
GalaxyNASLX2 with a time server on the Internet. This is activated only when the 'NTP
Server' box is checked
A good NTP site that can be used is ' ntp.nist.gov '
Note: Time and date display are static. What is shown are the time and date at which the
setup menu was accessed.
Figure 3.11
44
A N D S Y S T E M I N T E G R A T I O N G U I D E
Section 3 Menu Functions