Changing The Nas Network Name Figure 2.7; Setting The Nas Date And Time Figure 2.8 - Rorke Data GalaxyNASLX2 Configuration And System Integration Manual

G A L A X Y N A S L X C O N F I G U R A T I O N
2.3.3 Changing the NAS network name
For security reasons, you should setup a new network name for the NAS. To do so, click on
'Setup' 'server' and under Function 'NAS Server Name' enter a new Server Name followed by
a simple comment to describe the function / location of the NAS. Click the 'apply' to activate
.See figure 2.7
Figure 2.7

2.3.4 Setting the NAS Date and Time Figure 2.8

Follow these steps to manually setup the date and time for the NAS. To do so, click on 'Setup'
'server' and under Function 'Set Time' click the 'manual' button followed by the date and time
based on a 24 hour military time. Click the 'apply' to activate .See figure 2.8
NOTE: to use a Network Time Protocol server, follow the procedure in section 3
Figure 2.8
26
A N D S Y S T E M I N T E G R A T I O N
Figure 2.7
G U I D E
Section 2 Basic Setup