Explanation Of Symbols - Samil Power SP-SR-V5-EN Product Manual

2.3 Explanation of Symbols

This section gives an explanation of all the symbols shown on the inverter and on the type label.
● Symbols on the Inverter
Symbol
5
● Symbols on the Type Label
Symbol
● Important Safety Instructions
When using the product, please do remember the below information to avoid the fire, lightning
or other personal injury:
Danger to life due to high voltages in the inverter!
There is residual voltage in the inverter. The inverter requires
min
5 minutes to discharge.
• Wait 5 minutes before you open the upper lid or the DC lid.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact during
operation.
Danger of high voltages
Danger to life due to high voltages in the inverter!
Caution, risk of electric shock!
Only authorized personnel is allowed to set the DIP switch.
CE mark.
The inverter complies with the requirements of the applicable
CE guidelines.
Warning !
Ensure input DC voltage ≤ Max. DC voltage .Over voltage may
cause permanent damage to inverter or other losses, which will not
be included in warranty! This chapter contains important safety and
operating instructions. Read and keep this Operation Guide for
future reference.
Explanation
Explanation
Safety
7