Safety Instructions
Air Circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
CAUTION
or installing the projector, the following precautions
should be taken.
objects.
especially screws and metallic parts. These areas will
become hot while the projector is being used.
cabinet will not only get damaged but also may cause
Cooling fans are provided to cool down the projector.
The fans' running speed is changed according to the
temperature inside the projector.
Downloaded From projector-manual.com Viewsonic Manuals
Air Intake Vent
Air Intake Vent
Installing the Projector in Proper Position
Install the projector properly. Improper installation may
degrees from side to side.
degrees from above and below.
Do not point the projector up to project an
image.
Do not point the projector down to project
an image.
Do not put the projector on either side to
project an image.
Moving the Projector
When moving the projector, replace the lens cap and
retract adjustable foot to prevent damage to the lens and
cabinet.
put it into a suitable case.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
or malfunctions may result.
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
is cooled enough.