Video Input; Input Source Selection - ViewSonic PJL6223 User Manual

Choose Video or S-video
VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
1
Menu. Use the Point
then press the Point
2
Use the Point
When video input signal is connected to the
Video
VIDEO jack, select Video.
Use the Point
press the Point
the Point buttons to select the S-video and then press
When the input source is coming from video
S-video
equipment connected to the COMPUTER IN
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
Downloaded From projector-manual.com Viewsonic Manuals
Input Source Selection (Video, S-video)
Direct Operation
Menu Operation
buttons to select Input and
or
buttons to select Video and then
buttons to select Computer 1. And then
button to access the submenu items. Use
S-VIDEO.

Video Input

Remote Control
Input Menu
VIDEO button
Video
S-VIDEO button
S-video
Computer
1
Auto
Auto