Video System Selection - ViewSonic PJL6223 User Manual

Video Input
1
Menu. Use the Point
then press the Point
Select Video, S-video or Computer 1(Component)
2
Use the Point
3
press the Point
buttons to select the desired system and then
Video or S-video
Auto
The projector automatically detects an incoming video
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
576i, 480p, 576p, 720p, 1035i, and 1080i.
Note:
The AV System Menu cannot be selected when selecting
RGB (Scart).
Downloaded From projector-manual.com Viewsonic Manuals

Video System Selection

buttons to select Input and
buttons to select System and then
AV System Menu (Video or S-video)
AV System Menu (Component)