Projector Position; High Altitude; Audio Settings - ViewSonic PJD7828HDL User Manual

Function
Sets the language for the On-Screen Display (OSD) menus.
Language
See
Projector
See
Position
Menu Display Time
Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second
Menu Settings
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
Blank Timer See
Allows you to select which logo screen will be displayed
Splash Screen
during projector start-up.
See
Screen Capture
details.
My Button Sets a hotkey on remote control.
Pattern
The projector can display several test patterns. It helps you
adjust the image size and focus and check that the projected
image is free from distortion.
Message
Advanced
Selecting On displays the current information on the screen
when the projector is detecting or searching for a signal.
Presentation Timer
See

High Altitude

A mode for operation in high altitude areas. See
your own startup screen" on page 37
Mode
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the
projector will automatically switch the lamp mode between
normal and economic modes according to the input image
detected.
DCR

Audio Settings

See
Description
"Using the menus" on page 24
"Choosing a location" on page 13
"Hiding the image" on page 37
"Creating your own startup screen" on page 37
"Setting the presentation timer" on page 36
This function is only available when a PC input signal
is selected.
After enabling DCR, frequent lamp mode switching
may shorten lamp life and noise level will vary during
operation.
"Adjusting the sound" on page 39
48
for details.
for details.
for details.
for
for details.
"Creating
for details.
for details.