Zoom And Focus Adjustment; Auto Setup Function; Keystone Correction - ViewSonic PJL6223 User Manual

Rotate the Focus Ring to adjust the focus of the image.
setting of Auto setup (includes Input search, Auto PC adj.
and Auto Keystone functions) in the setting menu by just
pressing the AUTO SETUP button on the top control or the
for the setting of the Auto setup function.
Notes:
to On
ensured with the Auto setup function. If the distortion
cannot be corrected properly by pressing the AUTO
SETUP or AUTO SET button, adjust manually by
pressing the KEYSTONE button on the remote control
Fine sync, Total dots, Horizontal and Vertical
position of some computers cannot be fully adjusted
with the Auto PC Adjustment function. When the image
is not provided properly with this operation, manual
If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control, correct the image
manually as follows:
Press the KEYSTONE button on the remote control. The
correct keystone distortion. The keystone adjustment can be
Reduce the upper width
with the Point
Downloaded From projector-manual.com Viewsonic Manuals

Zoom and Focus Adjustment

Auto Setup Function

Keystone Correction

Reduce the lower width
button. with the Point
Top Control
Remote Control
correction.
buttons to
remote control once more while the keystone
button.
adjustment will be canceled.
input signal.
Basic Operation
Focus Ring
AUTO SETUP button
POINT buttons
AUTO SET button
POINT
KEYSTONE button
Zoom Ring
buttons