ViewSonic PJL6223 User Manual page 100

3. Select "Network setting" in the Network menu and press SELECT button, and then the
LAN setting screen will appear and selected LAN settings will be displayed. Adjust each
item to the setting environment. Consult your system administrator about the detailed
settings.
Press SELECT button in a row where you want to adjust, and adjust the figures with the
Point ed buttons and move among the items with the Point
SELECT button to fix. Move to the next row with the Point ed buttons to adjust.
4. After completing all the settings, select "Set" and press SELECT button. Now, all
procedures have been done. To cancel the adjusted settings, select "Cancel" and press
SELECT button.
You can confirm the LAN settings you have made from "Network information" (p.14). In
such cases that the LAN cannot be connected, see this screen.
DHCP: On
Item
DHCP....................Sets DHCP function On or Off. When you setup the network setting manually, select
IP address .............Sets IP address of the projector
Subnet ....................Sets Subnet mask according to your network environment.
Gateway* 2 .............Sets IP address of the default gateway (Router)
DNS* .......................Sets IP address of the DNS server.
3
*1 Set "On" only when the DHCP server is available on your network environment.
*2 Set [255.255.255.255] if the network does not provide the gateway (router).
*3 Set [255.255.255.255] if you do not use the function E-mail alert.
Downloaded From projector-manual.com Viewsonic Manuals
Description
"Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set
according to your network environment *
buttons, and then press
Network setting
DHCP: Off
* The numerical value is a setting example.
1 .
Network configuration