Table of Contents
Advertisement
Quick Links
ViewSonic
PJL7200/PJL7201/PJL7202
LCD Projector
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found
on our web site at http://www.viewsonic.com in English, or in specific languages
using the Regional selection box in the upper right corner of our website.
"Antes de operar su equipo lea cuidadosamente las instrucciones en este manual"
®
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
- 사용자 안내서
- คู ่ ม ื อ การใช้ ง าน
- Керівництво користувача
Model No. : VS12186
VS12199
VS12234
Advertisement
Table of Contents
Related Manuals for ViewSonic PJL7201
Summary of Contents for ViewSonic PJL7201
-
Page 1: Lcd Projector
Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website. -
Page 2: Compliance Information
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 3: Important Safety Instructions
ViewSonic PJL7200/PJL7201/PJL7202... -
Page 4: Declaration Of Rohs Compliance
0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Proposed Maximum Actual Concentration Concentration 0.1% 0.1% 0.01% 0.1% 0.1% 0.1% PJL7200/PJL7201/PJL7202 < 0.1% < 0.1% < 0.01% < 0.1% < 0.1% < 0.1%... -
Page 5: Copyright Information
VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. - Page 6 Projector About the Owner’s Manual Please read the owner’s manual thoroughly to ensure correct usage of the projector and its features. After reading, store the owner’s manual in a safe place for future reference. Features 1. Dress up Design 2. Designed for tough environment 3.
-
Page 7: Table Of Contents
Picture Menu (PC Mode) ... 19 Audio Menu (PC Mode) ... 20 Image Menu (PC Mode) ... 21 MENU (Video Mode) ...22 Picture Menu (Video Mode) ... 22 Audio Menu (Video Mode) ... 23 Image Menu (Video Mode) ... 24 ViewSonic PJL7200/PJL7201/PJL7202... -
Page 8: Contents
Air Filter / Replacing the Air Filter ... 46 Lamp / Replacing New Lamp ... 47 Other Care / Cleaning the Lens ... 48 Troubleshooting ...49 Indicator ... 49 Error For Machine Defects ... 50 List of Supported Monitor Displays ... 52 Appendix ViewSonic PJL7200/PJL7201/PJL7202... -
Page 9: Contents Of Your Box
Please make sure that following items are included in the box, along with the main. If any items missing, contact your dealer. 1.Projector 3.Power cord 5. USB Cable (1.5M) ViewSonic 2.Remote control 4. Computer cable 6. Quick Start Guide PJL7200/PJL7201/PJL7202... - Page 10 Safety Instructions Contents of Your Box 7. Owner’s Manual CD 9. Soft Bag ViewSonic 8. Network Control Application CD (Optional) PJL7200/PJL7201/PJL7202...
-
Page 11: Safety Instructions
Do not look into the lens of the projector or look inside of the projector. Do not place the projector upon either side to project an image. NO SIDEWARD Do not point the projector down to project an image. NO DOWNWARD PJL7200/PJL7201/PJL7202... -
Page 12: Safety Labels
Safety Labels Safety Labels Safety labels are used on or within the projector to alert you to items or areas requiring your attention. WARNING LABEL EMI LABEL LAMP DOOR WARNING LABEL ViewSonic PJL7200/PJL7201/PJL7202... -
Page 13: Part Names
Rotate the zoom ring until the image is the desired size. Lamp door The lamp unit is inside. Foot adjust button Lock / unlock the adjustable foot. Front adjustable foot Extend and retract to adjust the projection angle. PJL7200/PJL7201/PJL7202... -
Page 14: Control Panel
Automatically adjust the setting to match the current input. (POWER) Power on / operation mode, Standby mode, Cooling-down mode. LAMP INDICATOR Indicates a status in the internal projector temperature, lamp door properly closed or cooling down. POWER INDICATOR Light on or flash to indicate the operating status of the projector. PJL7200/PJL7201/PJL7202... -
Page 16: Setting Up
5.83~7.03 4.36~5.26 Image size(inch) Distance (feet) Tele 4.49 5.65 6.81 7.97 9.13 10.29 11.45 17.26 23.06 28.87 34.67 Image size(inch) 1.11~1.37 1.7~2.08 2.29~2.78 2.88~3.49 4.36~5.26 5.83~7.03 8.79~10.57 Distance(M) PJL7200/PJL7201/PJL7202 Wide 3.64 4.61 5.58 6.54 7.51 8.48 9.45 14.29 19.13 23.98 28.82... -
Page 17: Power On / Off
POWER indicator will light up in green. 4. If you don’t use the projector, remove power cord. WARNING Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot. PJL7200/PJL7201/PJL7202... -
Page 18: Setting Up The Projector
The projector supports the following four different projection methods. 1.Front projection 2.Rear projection Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for details. ViewSonic 3.Rear ceiling projection 4.Front ceiling projection PJL7200/PJL7201/PJL7202... -
Page 19: Ceiling Mounted Installation Guide
WARNING ►Do not grasp the security anchor to carry projector, since it is not designed for it. ► T he security anchor is not for comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure. ViewSonic MAX M4x8 mm For Mounting. Security Anchor The product is equipped with security anchor and PIN LOCK functions to help prevent unauthorized removal projector. PJL7200/PJL7201/PJL7202... -
Page 20: Adjusting The Projector's Elevation
* The adjustment range of front adjustable foot is 0 to 8.5 degrees. * When the foot is adjusted, it may cause the shape of the projected image to become distorted. Use the keystone correction function to correct this distortion. PJL7200/PJL7201/PJL7202... -
Page 21: How To Connect
Connect either end of the computer cable to the projector’s RGB IN. Connect the computer cable from the computer to the projector. If needed, connect the MONITOR OUT to a monitor to view input from RGB IN. Tighten the screw on all connectors. ViewSonic PJL7200/PJL7201/PJL7202... - Page 22 / off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the laptop. Press Fn and the labeledfunction key simultaneously. Refer to your laptop’s documentation to discover your laptop’s key combination. ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 23: Remote Control
3. Close the battery cover. Caution ►Avoid excessive heat and humidity. ►Do not drop the remote control. ► I f the remote control will not be used for an extended period, remove the batteries. ► D o not expose the remote control to water or moisture. This could result in malfunction. ► R eplace the battery when remote control operation becomes sluggish or unresponsive. ► D o not place the remote control close to the cooling fan of the projector. ► D o not use batteries of different types at the same time. ► D o not mix a new battery with used one. Make sure the plus and terminals are correctly aligned when loading batteries. ► D ispose of batteries in accordance with environmental laws. ► D o not disassemble the remote control. If the remote control needs service, please contact your dealer. ViewSonic PJL7200/PJL7201/PJL7202... - Page 24 Press button to move arrow direction of window. MOUSE-L / MOUSE-R The function is like mouse of desktop/ notebook. Remote control’s mouse functions only will work if the USB cable is connected (see page 15 for instructions) ViewSonic PJL7200/PJL7201/PJL7202...
-
Page 25: Menu Operation
2. Choose which item you want to enter, you could press up / down /left/ right button of control panel or remote control to adjust item or value. ViewSonic Up / Down / Right / Left button Menu button PJL7200/PJL7201/PJL7202... -
Page 26: Menu (Pc Mode)
It to be suitable to the environment has strong light. Adjust the color settings and makes the projected image on a (green,white, black) board more visible. Adjust the image color temperature level. User Red 000/100 User Green 000/100 User Blue 000/100 PJL7200/PJL7201/PJL7202... -
Page 27: Audio Menu (Pc Mode)
MENU (PC Mode) Audio Menu Item Selection VOLUME 00/40 DVI-I CHANNEL Y,Pb,Pr SETTING VIDEO S-VIDEO ViewSonic Description Adjust the volume. Step: 1. U se the ▲ /▼ buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. PJL7200/PJL7201/PJL7202... -
Page 28: Image Menu (Pc Mode)
Correct vertical keystone distortion in image manually. 4:3, 16:9, Native Set all of the above setting automatically. Search signal source manually or automatically. Step: 1. U se the ▲ /▼buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. PJL7200/PJL7201/PJL7202... -
Page 29: Menu (Video Mode)
(green,white, black) board more visible. Adjust the image color temperature level. User Red 000/100 User Green 000/100 User Blue 000/100 PJL7200/PJL7201/PJL7202 Step: 1. U se the ▲ /▼ buttons to select an item. 2. U se the ◄ / ► cursor buttons to select an item or adjust the value. -
Page 30: Audio Menu (Video Mode)
MENU (Video Mode) Audio Menu Item Selection VOLUME 00/40 DVI-I CHANNEL Y,Pb,Pr SETTING VIDEO S-VIDEO ViewSonic Description Adjust the volume. Step: 1. U se the ▲ /▼ buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. PJL7200/PJL7201/PJL7202... -
Page 31: Image Menu (Video Mode)
Automatically Correct keystone distortion in image. Correct vertical keystone distortion in image manually. 4:3, 16:9 Search signal source manually or automatically. Step: 1. U se the ▲ /▼buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. PJL7200/PJL7201/PJL7202... -
Page 32: Menu
Select (500 / 800 / 1000 hours) depending on the environment.(default : 500 hours). Please see as below. Step: 1. U se the ▲ /▼buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. 日本語 Nederlands 한국어 Русский Svenska Español PJL7200/PJL7201/PJL7202... -
Page 33: Reset Lamp Timer
The lamp timer is the time counted after the last resetting. The usage time of the lamp is shown in the PRESENTATION Menu. Pressing the RESET button or the ► button displays a dialog. To reset the lamp time, select the RESET using the ► button. NOTE ► T he replacement warning message is set to appear after about 2000 hours of lamp use in order to maintain the initial brighreplacement message appears, replace the lamp with a new one as soon as possible, even ifit is still working. ViewSonic PJL7200/PJL7201/PJL7202... - Page 34 The blank image. You can select color with background function. Start to capture the image.(PC mode only) Set background color. Display the captured image in original size and put in the center of the screen. Expend the image to full screen. PJL7200/PJL7201/PJL7202...
-
Page 35: Logo Capture
You can see the red frame to select captured area. Use 4 direction buttons to adjust the position of the frame. Press “MENU” to start capturing and display a dialog. NOTE ►To capture an image is available only in computer mode. ►The area that can be captured is 512 x 384 dots. ViewSonic Image Logo Capture In Progress. PJL7200/PJL7201/PJL7202... -
Page 36: Option Menu
Mirror the image horizontally, only for projecting onto rear projection screen. Mirror the image horizontally and vertically. Projecting onto a rear projection screen while projector is upside down. Step: 1. U se the ▲ /▼buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. PJL7200/PJL7201/PJL7202... -
Page 37: Advanced Menu
NOTE: This function is available only in video / S-Video source. Choose when image is blank off. Turn off when no signal is received. Turn on lamp automatically. Step: 1. U se the ▲ /▼buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. Description PJL7200/PJL7201/PJL7202... - Page 38 Lock Protection], it is highly recommended that you write down the PIN code and store it in a safe place. Step: 1. U se the ▲ /▼buttons to select an item. 2. U se the ◄ / ► buttons to select an item or adjust the value. Description PJL7200/PJL7201/PJL7202...
-
Page 39: Pin Key In Operation
If you have no idea about the PIN, please contact your dealer for help. ViewSonic The control panel and remote control buttons to enter a sequence of PIN code is like the photo below. MENU to delete the wrong digit you entered. to confirm. ~OK) PJL7200/PJL7201/PJL7202... -
Page 40: Network Control Software Application (Optional)
To monitor and control the projector(including stand-by mode), the following conditions need to be ready: (1) Projector should already be powered on. (2) Projector is connected to network. (3) LED light of the projector network port shows normal. (Green light on, Orange twinkle) * Stand-by mode indictor: Green LED (Power) on the projector’s control panel flashes. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 41: Before Use
(3) Make sure the computer and projector can connect to network. Network Control software needs to arrange in TCP/IP network communication and the network cable. Open Network Control Software C lick Network control software icon. M onitor window will show as Graph 1 and Table 2. <Graph 1> ViewSonic PJL7200/PJL7201/PJL7202... -
Page 42: Projector Auto Search
(Graph3) C lick (register projector), the projector information will show on the monitor window. Click button (exit), it will cancel the registered item then return to register table. ViewSonic <Graph 2> <Graph 3> <Graph 4-1> Monitor window PJL7200/PJL7201/PJL7202... - Page 43 (Start Auto Scan) running in this program to monitor the projector. NOTE When pressing “About ” button for help, you will see icons explained as in the chart below. ViewSonic button (Data single capture) in the tool bar or PJL7200/PJL7201/PJL7202...
-
Page 44: Modify The Projector Setting
Show up the MAC code (The default value can not be modified) Show up the projector monitor status Monitor (The default set in power on status) Capture IP address from network sensor DHCP automatically. < Table 3 > : Setting Windows ViewSonic button or cancel by clicking Description PJL7200/PJL7201/PJL7202... -
Page 45: Registering And Configuring The Projector
Registering And Configuring The Projector Registering And Configuring The Projector Delete S elect the registered projector in monitor window. Click mouse right key and select “ Delete ” to erase the registered projector data. < Graph 6 > : Register Table. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 46: Projector Setting
S elect the registered projector in monitor window. Click mouse right key and select “ projector setting ” to modify the registered projector data. After finishing the setting, you can save by clicking < Graph 7 > : Register table. < Graph 8 > :Setting table. ViewSonic button or cancel by clicking button. PJL7200/PJL7201/PJL7202... -
Page 47: System Setting / Monitor / Default Setting / Auto Detect Optimal Setting
Registering And Configuring The Projector Projector Setting Click button (system setting) to modify system alert setting. < Graph 9 > <Graph 10> :Setting table. ViewSonic PJL7200/PJL7201/PJL7202... - Page 48 Auto Detect setting. Default setting includes 1/3/5/10 minutes; user can set the optimal default listed in Table 6. 1/3/5/10 3/5/10 5/10 10> < Table 4 > < Table 5 > * The maximum quantity of projector monitored is 255. < Table 6 > PJL7200/PJL7201/PJL7202...
-
Page 49: Link
S elect the registered projector in monitor window. Click mouse right key and select “ Link ” to show up the control panel table and the projector connected status. < Graph 12 > : The control panel table ViewSonic PJL7200/PJL7201/PJL7202... -
Page 50: Control Panel Window Introduction
Video S-Video Y,Pb,Pr DVI-I RGB 1 Change Input Source F unction Key Icon Name Down Left Right Menu Auto Sync Mute ViewSonic Icon Name Freeze Blank Keystone Correction + Keystone Correction - Increase Brightness Decrease Brightness Higher Contrast PJL7200/PJL7201/PJL7202... -
Page 51: Function Key / Projector Status
Control Panel Window Introduction Function Key Icon Name Lower Contrast Zoom In Zoom Out Volume Up Volume Down Projector Status Icon Name System Status Input Source Status Lamp Timer Air Filter Timer ViewSonic PJL7200/PJL7201/PJL7202... -
Page 52: Network Control Window Introduction
Auto Search register and modify the setting. Open Project File Open project file which was saved. Save Project File Save the registered projector in this project. System Setting Setting the projector system remind message. About Icon content description. Exit Exit the Network software. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 53: Maintenance Of Projector
When a warning message appears to remind you to clean the air filter, please replace a new one as soon as possible. Please check and clean the air filter periodically. Replacing the Air Filter When the use time reaches the filter counter time, the projector will display a message that indicates to replace a new filter. If there is no spare air filter available, please contact your dealer. New one Turn off the projector, and unplug the power cord. Allow the projector to sufficiently cool down. Remove the filter cover from the right side of projector. Pull out the air filter. Install a new air filter. Put the filter cover on. Reset filter timer after cleaning or changing air filter. (P.25) ViewSonic PJL7200/PJL7201/PJL7202... -
Page 54: Lamp / Replacing New Lamp
2. Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out the lamp straight off the projector. 3. Insert new lamp, lock the lamp door firmly with 2 screws. 4. Put the lamp door on. 5. Please reset the lamp timer after replacing lamp. (P.26) ViewSonic AC IN PJL7200/PJL7201/PJL7202... -
Page 55: Other Care / Cleaning The Lens
- Before maintenance, make sure the power cable is unplugged, allow the projector to cool sufficiently. The high temperature state of the projector could cause a burn in and/or malfunction to the projector. -Never try to maintain the inside of the projector by yourself - Avoid wetting the projector or inserting liquids in the projector. This could result in a fire, an electric shock, and/or malfunction to the projector. ViewSonic PJL7200/PJL7201/PJL7202... -
Page 56: Troubleshooting
Correct the over temperature condition immediately. 1. Check that the ventilation slots are free from obstructions. 2. Check the cleanliness of the air filter. The lamp does not light. Come back to “ stand by mode ”, and press the power button. PJL7200/PJL7201/PJL7202... -
Page 57: Error For Machine Defects
The lamp is near the end of its service life. Replace with a new lamp. The projection lens is not focused. Adjust the focus using the focus ring. Video is blurred The lens is dirty or misty. Clean the lens. ViewSonic Cause / Remedy PJL7200/PJL7201/PJL7202... - Page 58 Press the MUTE button. No battery. Before using the remote control, please check the battery of remote Remote control is control. not working. Remote signal is obstructed. Remove the obstacle between projector and remote control. ViewSonic Cause / Remedy PJL7200/PJL7201/PJL7202...
-
Page 59: List Of Supported Monitor Displays
60 /75 60/75/85 60/75 Refresh Rate (Hz) Refresh Rate (Hz) Resolution (dots) 640x480 640x480 800x600 1024x768 1152x864 1280x960 1280x1024 1280x800 1440x900 1400x1050 1600x1200 1280x1024 / 640x480 832x624 1024x768 1152x870 Resolution (dots) 720x480 720x480 1280x720 1920x1080 Resolution (dots) 720x480 720x576 PJL7200/PJL7201/PJL7202... -
Page 60: Appendix
AUDIO 1 AUDIO 2 AUDIO 3 MUTE AUDIO 1 AUDIO 2 DVI-I AUDIO 3 MUTE AUDIO 1 Y,Pb,Pr AUDIO 2 AUDIO 3 MUTE AUDIO 1 VIDEO AUDIO 2 AUDIO 3 MUTE AUDIO 1 S-VIDEO AUDIO 2 AUDIO 3 MUTE PJL7200/PJL7201/PJL7202... - Page 61 LOGO SIZE FULL NORMAL ECOMONIC 500 HOURS 800 HOURS 1000 HOURS ON 1 PIN LOCK PROTECTION ON 2 MODIFY PIN 15 MINUTES 30 MINUTES 60 MINUTES 15 MINUTES 30 MINUTES 60 MINUTES ITALIAN POLISH PORTUGUESE RUSSIAN SPANISH SWEDISH UKRAINIAN THAI PJL7200/PJL7201/PJL7202...
- Page 62 AUDIO 1 AUDIO 2 AUDIO 3 MUTE AUDIO 1 AUDIO 2 DVI-I AUDIO 3 MUTE AUDIO 1 Y,Pb,Pr AUDIO 2 AUDIO 3 MUTE AUDIO 1 VIDEO AUDIO 2 AUDIO 3 MUTE AUDIO 1 S-VIDEO AUDIO 2 AUDIO 3 MUTE PJL7200/PJL7201/PJL7202...
- Page 63 500 HOURS 800 HOURS 1000 HOURS ON 1 PIN LOCK PROTECTION ON 2 MODIFY PIN C.C1 C.C2 C.C3 C.C4 15 MINUTES 30 MINUTES 60 MINUTES 15 MINUTES 30 MINUTES 60 MINUTES ITALIAN POLISH PORTUGUESE RUSSIAN SPANISH SWEDISH UKRAINIAN THAI PJL7200/PJL7201/PJL7202...
- Page 64 Appendix Appearance 102.5 100.56 97.2 ViewSonic PJL7200/PJL7201/PJL7202...
- Page 65 Example: Power ON command is sent to the projector with a CR, the projector returns a “06” code. Command (ASII) C 0 0 CR Projector ViewSonic Specification 9600 bps 8 bits None 1 bit None Projector side with D-sub pin RX 2 TX 3 GND 5 Processing Command PJL7200/PJL7201/PJL7202...
-
Page 66: Command List
ViewSonic Remarks POWER ON POWER OFF Y,Pb,Pr VIDEO S-VIDEO VOLUME+ VOLUME- MENU DOWN LEFT RIGHT MUTE FREEZE ZOOM+ ZOOM- SOURCE AUTO CONTRAST+ CONTRAST- BRIGHTNESS+ BRIGHTNESS- BLANK KEYSTONE+ KEYSTONE- POWER-STATUS STATUS feedback ″ 000 ″-projector is on ″ 800 ″-projector is standby ″ 200 ″-projector is cooling down ″ 500 ″-projector is warm up SOURCE-STATUS STATUS feedback ″ 001 ″-RGB PJL7200/PJL7201/PJL7202... - Page 67 Appendix IR Control Code Custom Code : 0x6A Data Code DATA POWER INPUT MENU LEFT RIGHT DOWN MUTE BLANK AUTO ViewSonic CODE 0x00 0x11 0x27 0x14 0x16 0x18 0x19 0x13 0x23 0x1F PJL7200/PJL7201/PJL7202...
-
Page 68: Customer Support
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16 Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico Latin America (Peru) www.viewsonic.com/la/ Macau www.hk.viewsonic.com... -
Page 69: Limited Warranty
Europe: 3 years for all parts excluding the lamp, 3 years for labor, 1 year for the original lamp from the date of the first consumer purchase. Other regions or countries: Please check with your local dealer or local ViewSonic office for the warranty information. - Page 70 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon...
-
Page 71: Mexico Limited Warranty
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience,... - Page 72 Tel: (52) 999-925-1916 E-Mail: rrrb@sureste.com Tijuana: Av Ferrocarril Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico 4.3: ViewSonic Mexico Limited Warranty ViewSonic Villahermosa: Compumantenimietnos Garantizados, S.A. de C.V. AV. GREGORIO MENDEZ #1504 COL, FLORIDA C.P. 86040 Tel: 01 (993) 3 52 00 47 / 3522074 / 3 52 20 09 E-Mail: compumantenimientos@prodigy.net.mx...