Stopping Monitoring The Target; Displaying All The Status Information Of The Target; Setting The Target Group - ViewSonic PJL6223 User Manual

Chapter 3 Basic Operation

Stopping monitoring the target

To stop monitoring the target, click

Displaying all the status information of the target

Select a target and click
and displays all the available status information of the target.
The above procedure can perform by selecting Target display from Display menu.

Setting the target group

The target group can be set up by the procedure below. When you set a command in the
same group, you set it.
1
Select targets which you want to set from the status list. Select Group setting from
Target menu, the dialog box will appear as the below figure.
2
Select a group, and then click OK button.
The projectors setting different network passwords cannot be set to the same group. It is nec-
essary for the projectors in the same group to set to the same password.
Downloaded From projector-manual.com Viewsonic Manuals
button again on the tool bar.
button on the tool bar. The following status window appears
The target name and item which have an
abnormality or connection error happen-
ing are indicated with red.
W h e n PJ N e t wor k M a n a g e r c a n n o t
acquire the value of column information,
"---" is displayed.
"---" will not set the group.