Information; Input Source Information Display - ViewSonic PJL6223 User Manual

The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Press the INFO. button on the remote control to display the
Information Menu.
Press the Point
Information Menu is displayed.
See below for displayed information.
Input
The selected input source is displayed.
H-sync freq.
KHz, or - - - - KHz when no signal.
V-sync freq.
The vertical frequency of the input signal is displayed in Hz,
or - - - - Hz
during Interlace.
Screen
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
Off, Ready or Shut down, and Timer are displayed.
Key lock
The selected Key lock icon is displayed.
PIN code lock
Off or On1 or On2 is displayed.
Remote control
The selected remote code is displayed.
Downloaded From projector-manual.com Viewsonic Manuals

Input Source Information Display

Direct Operation
Menu Operation
buttons to select the Information. The

Information

Remote Control
Information Menu
INFO. button