Drivers; Installing On Windows; Installing On Red Hat Enterprise Linux; Connecting Cables - Fujitsu LTO-2 User Manual

1. SAS connector
2. Power connector
Figure 2 Connecting cables
.
CAUTION:
Never use a cable where power is supplied through the SAS connector because this may damage
the drive. Always use a spare power cord from the server's internal power supply.

Drivers

The driver can be obtained from the Fujitsu Tape Support CD, for updates please check
support.ts.fujitsu.com. Refer also to the documentation of your software application to ensure you are
using the recommended driver.

Installing on Windows

Install as instructed in the readme file in the drivers directory.

Installing on Red Hat Enterprise Linux

Install as instructed in the readme file in the drivers directory.
10 Getting started
http://