Chapter 7 Installing Drivers And Setting Up The Server - Fujitsu ETERNUS DX Disk User Manual

Chapter 7
Installing Drivers and Setting Up the Server
Install the Fibre Channel Card driver, and then set up the server environment.
Refer to "ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) for Linux Driver
Settings for Non-Fujitsu Fibre Channel Cards" for detailed setting procedures.
• When Emulex Fibre Channel cards or Fujitsu Emulex Fibre Channel cards are used, refer to the "Operations
When Using Emulex Fibre Channel Cards" chapter.
When QLogic Fibre Channel cards or Fujitsu QLogic Fibre Channel cards are used, refer to the "Operations
•
When Using QLogic Fibre Channel Cards" chapter.
When Brocade Fibre Channel cards are used, refer to the "Operations When Using Brocade Fibre Channel
•
Cards" chapter.
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
24
Copyright 2013 FUJITSU LIMITED
P3AM-3842-12ENZ0