Operating Your Tape Drive; Loading A Cartridge; Inserting A Cartridge - Fujitsu LTO-2 User Manual

3 Operating your tape drive

In this chapter:
• "Loading a
• "Unloading a
• "Removing power from the

Loading a cartridge

1. Lift the drive door and insert the cartridge into the slot in the front of the drive with the white
arrow uppermost and facing the drive door.
1. Arrow indicates leading direction
3. Drive door
Figure 3 Inserting a cartridge
.
2. Apply gentle pressure until the drive takes the cartridge and loads it. (See
"Inserting a
3. The Ready LED flashes green while the drive performs its load sequence. When the cartridge is
loaded, the Ready LED shows steady green.
cartridge" on page 13
cartridge" on page 14
drive" on page 14
cartridge" on page 13.)
2. Label area
4. Ready LED
LTO-2 Half-Height SAS Tape Drives 13