Placing Calls Quickly; Speed Dial - NEC DS2000 Quick Reference Manual

Park a call in orbit
(Cont'd)
To retrieve a call from 1.
system orbit:
2.
1. Do not hang up.
Park a call at a
co-worker's extension:
2.
•
3. Hang up.
To retrieve a call 1. (Optional) Lift handset for privacy.
parked at a co-worker's
extension:
2.
Forward (reroute) your calls to a co-worker . . .
1. (Optional) Lift handset for privacy.
While at your desk or
out of the office, for-
2.
ward your calls to a
co-worker or Voice
3. Dial Call Forwarding type:
Mail:
0
2
4
6
4. Dial destination extension (or 0 for your
operator).
4. Press
extension number to forward to Voice Mail.
5. Dial
Dial
or lift handset.
+ + System Park Orbit (60-69).
+ + Extension (e.g., 300).
To Page before hanging up, dial * 1
and the zone number (1-7, 0 for all call).
+ + Extension (e.g., 300).
+ .
= Cancel forwarding
= Busy/No Answer
= Immediate
= No Answer
OR
or dial the Voice Mail master
MW
to forward all calls.
OR
to forward just outside calls.

Placing Calls Quickly

Quickly dial co-workers and outside calls . . .

Speed Dial

1.
To store Personal
Speed Dial numbers
2. Dial Personal bin number (701-720).
(Intercom codes or
outside numbers):
2. Press bin key (for bins 701-710), or
bin key (for bins 711-720).
3.
4. Dial the line number (e.g., 1 for line 1) the
system will use for your stored number.
4. Dial the line group number (e.g., 90-98 for
line groups 0-8) the system will use for
your stored number.
4. Press
5.
6. Enter the number to store +
•
7.
Dial number.
•
8.
9. Repeat from step 2 to program another
Personal Speed Dial number.
9.
.
OR
DIAL
.
OR
OR
ICM if storing Intercom codes.
.
.
You can enter up to 16 digits, using 0-9,
# and *. Press to insert a pause;
MIC
to insert a Flash.
FLASH
+ Enter a name for your Speed
Refer to Name Programming at the bot-
tom of the next page.
.
OR
to exit.
+