Stitch-Out Order - Pfaff creative 4.5 Owner's Manual

Stitch-out order

Designs are by default stitched out in the order they
are loaded to Embroidery edit. The numbers (A)
between the arrows show the position in the stitch-
out order for the selected design as compared to the
total number of designs in the embroidery area.
When the group icon is touched, any designs that
are selected on the screen will be grouped together.
Adjustments made will affect all designs in the
group. The stitch-out order of the designs might
change after they have been grouped. To ungroup,
just deselect the icon.
When touching the delete icon, the selected
design(s) will be deleted from the embroidery
Long touch the delete icon to delete all. A pop-up
Touch the duplicate icon to make a copy of the
selected design(s).
If you want more than one copy, long touch the icon
and a pop-up will open where you can enter the
desired number of copies.
To mirror a design side to side, touch icon (10) and
for mirroring end to end, touch icon (11).
This is used to move any design that is outside the
hoop area into the hoop area. The design will be
placed as close to the previous position as possible.
8:6
10 12
11
13
Touch the arrow pointing left to undo your latest
design adjustment. Touch repeatedly to step back
through your adjustments.
Note: Not all adjustments can be undone. The arrows
will be greyed out if undo is not possible.
Redo is activated when Undo is touched, so you can
step forward again through your adjustments.
A
6
7
8
14