Embroidery Stitch Editor - Pfaff creative 4.5 Owner's Manual

Sequences and stitches can be adjusted in
Embroidery stitch editor. You can also adjust
your own created sequence or stitch, loaded to
Embroidery edit (see chapter 5 and 6).
Note: When a stitch or a sequence is loaded into
Embroidery edit, tie-offs are automatically inserted
at the beginning and at the end. The tie-offs are
only visible when you open the stitch or sequence in
sequencing.
Open Embroidery stitch editor to adjust the
stitches. The adjustments will affect the stitch
just like they do in sewing mode. If more
than one sequence is inserted, you can toggle
between them using the arrows (A).
Use the + and - icons to increase or decrease
the stitch width (C) and stitch length (D).
Density (E) can be changed if satin stitches are
inserted.
When mirroring (B), the stitch will be mirrored
within its own area. It will not affect the
position of the stitch like when mirroring is
used in Embroidery edit.
You can also use the touch functions to
make adjustments. The selected stitch will be
affected as if it was a design.
Note: If you make adjustments to a sequence or
stitch in Embroidery stitch editor, you can still use
sequencing or Stitch Creator
When returning to Embroidery edit, the sequence or
stitch will be replaced by the adjusted one.
8:18
feature to modify it.
™
26
C D E
B
Decrease width of the
selected stitch
Mirroring the selected
stitch side to side
A
Decrease length of the
selected stitch
Mirroring the selected
stitch end to end