Table of Contents
Advertisement
4.
Open the selection menu and select design
cm_52. vp3 again. Center it by touching the
wheel center icon when the touch function -
move is active.
5.
Open Basic Shape Creator™ feature. Select
the clockwise circle in the list (A). Touch Enter
number of designs (B) to open the keypad, enter
16 and touch OK. Select the touch function -
scale. Either touch and drag on the screen, or
use the arrows in the wheel to decrease the size
to 55x55mm. The size is indicated just above the
wheel.
6.
Touch Select side positioning (D), select the
third option in the popup and touch OK.
7.
Close Basic Shape Creator™ feature by touching
OK (C). Toggle to Embroidery stitch-out to
embroider the design.
A
B
D
C
8:15
Advertisement
Table of Contents
