To sew the created stitch touch OK (18) in the top
right corner of the screen. The stitch will be loaded
to the mode that was active when entering Stitch
Creator™ feature; sewing mode or Embroidery edit.
If sewing mode is active when closing Stitch
Creator™ feature, your stitch will be loaded to
sewing mode and is ready to be sewn.
If selecting another stitch in sewing mode and then
re-opening Stitch Creator™ feature, your created
stitch will remain unchanged. Every time Stitch
Creator™ feature is closed, the stitch will be loaded
to sewing mode.
When loaded to Embroidery edit your stitch will
become an embroidery design. Go to Embroidery
stitch-out and stitch it out as a regular design.
If a stitch is selected and you re-open Stitch
Creator™ feature from embroidery mode, the stitch
will remain unchanged. If no stitch is selected, Stitch
Creator™ feature will be empty when re-opened,
ready to create something new. Every time Stitch
Creator™ feature is closed, the stitch will be loaded
to Embroidery edit.
Saving a stitch is done in sewing mode or
Embroidery edit. Close Stitch Creator™ feature
by touching OK (18) in the top right corner of the
screen.
In sewing mode stitches created in Stitch Creator™
feature are saved the same way as regular stitches.
Save the stitch by touching the Save options icon
(a) and personal menu (b). See page 4:9-4:10 for
A
more information.
Note: A stitch created in Stitch Creator™ feature cannot
be saved as a default stitch. The icon (c) will be grayed
out.
a
b
c
6:7