Advertisement
8
Installation instructions
11. Guarantee
For guarantees please refer to the respec-
tive terms and conditions of supply for
your country.
The installation, electrical
connection and first operation of
this appliance should be carried out by a
qualified installer.
12. Trouble-shooting
Fault
No hot water
The unit is not being switched
on. Electricity supply and flow
available.
Water not hot enough
for the user and the qualitified installer
The company does not accept liability
for failure of any good supplied which
have not been installed and operated
in accordance with the manufacturer's
instructions.
Cause
- The water flow volume
required for the unit
to turn on has not been
reached.
- Flow volume too low.
- Circuit breaker off
- Safety thermal cut-out trip
The water flow volume
required for the unit to turn
on has not been reached.
- Filter in the cold water
connection pipe blocked
with dirt.
- Water flow too high
- Heating setting too low
Solution
- Increase flow volume.
- Turn breaker on
- Reset thermal cut-out
- Clean the filter after shut-
ting off the cold water
intake
- Reduce water flow
- Turn knob to the right
(max. position)
Advertisement
