Electrical Connection - Elba OB60S4 Installation Instructions Manual

Built-in
Hide thumbs Also See for OB60S4:
Table of Contents

Advertisement

ELECTRICAL CONNECTION

5
Important!
This oven must be connected to the mains power
supply only by a suitably qualified person.
This oven must be earthed.
Before connecting the oven to the mains power
supply, check that
the domestic wiring system is suitable for the power
drawn by the oven
(as specified on the rating plate)
the voltage corresponds to the value given on the
rating plate.
SECURING THE OVEN TO THE CABINETRY
6
1
Position the oven in the prepared cavity.
Important!
Do not lift the oven by the door handle.
2
Open the oven door fully.
3
Use the supplied screws to secure the oven to the cabinetry.
Important!
Do not over-tighten the screws.
Do not seal the oven into the cabinetry with silicone or glue. This makes future
servicing difficult. Fisher & Paykel will not cover the costs of removing the oven,
or of damage caused by this removal.
Model code
Power
Voltage
OB60S4
3070 W
220 - 240 V~
OB60S7
3070 W
220 - 240 V~
1
L
N
(L )
1
2
E
Unhook to open cover
2
Unscrew to open
cable clamp
2.5 mm
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ob60s7

Table of Contents