4.1.9 Mirroring
Port Mirroring is used on a network switch to send a copy of network packets seen on one
switch port (or an entire VLAN) to a network monitoring connection on another switch port.
This is commonly used for network appliances that require monitoring of network traffic, such
as an intrusion-detection system.
Mirroring Configuration
Port to Mirror to: The port that will "duplicate" or "mirror" the traffic on the source port. Only
incoming packets can be mirrored. Packets will be dropped when the available egress
bandwidth is less than ingress bandwidth.
Ports to Mirror: Select the ports that you want to mirror from this section of the page. A port
will be mirrored when the "Mirroring Enabled" option is selected.
23