Intellinet 560900 User Manual page 14

 DHCP Enabled: Click the box to enable DHCP Client mode.
 Fallback IP address: Manually assign the IP address that the network is using. The default
IP is 192.168.2.1.
 Fallback Subnet Mask: Assign the subnet mask to the IP address.
 Fallback Gateway: Assign the network gateway for an industrial switch. The default
gateway is 192.168.2.254.
 Management VLAN: ID of a configured VLAN (1-4094) through which you can manage the
switch. By default, all ports on the switch are members of VLAN 1. However, if the
management VLAN is changed, the management station must be attached to a port
belonging to this VLAN.
 Name: Enter the new user name information.
 Password: Enter the new password (the default value is no password).
 SNMP Enabled: Enables or disables SNMP on the switch. Supports SNMP version 1 and
2c management clients.
 SNMP Trap Destination: IP address of the trap manager to receive notification messages
from this switch. Traps indicating status changes are issued by the switch to specified trap
managers. You must specify trap managers so that key events are reported by this switch
to your management station.
13