Intellinet 560900 User Manual page 12

Login Screen
The factory default password is no password: Just click Apply to log in directly.
Once the login is complete, the interface displays "Password successfully entered."
Note: To help ensure your switch's security, go to the System Configuration page and set
up a new password.
Below is the main screen. The left side shows the function list and the right side shows
the configuration parameters.
Troubleshooting
If you can't log in to the switch, the following steps can help you to identify the problem.
1. Switch to DOS command mode and enter "ipconfig" to check the NIC setting. Enter "ping
192.168.2.1" to verify a normal response time.
2. Check the security and firewall settings of your computer.
3. Try a different Web browser.
11