Maintenance; Warm Restart; Factory Default; Software Upload - Intellinet 560900 User Manual

4.3 Maintenance

4.3.1 Warm Restart

Click Yes to restart the switch. The reset will be complete when the power lights stop blinking.

4.3.2 Factory Default

Forces the switch to restore the original factory settings. To reset the switch, select "Reset to
Factory Defaults" from the drop-down list and click Apply. The LAN IP Address, Subnet Mask
and Gateway IP Address will be reset to their factory settings.
If you forget the password, you can press the Reset button on the front panel for 5 seconds.
Then the system will be reset to the default configuration.

4.3.3 Software Upload

Select "Upgrade Firmware" from the Tools drop-down list then click on Browse to select the
firmware file. Click Apply to upgrade the selected switch firmware file.
Figure: Browse and Upload new software.
35