Yamaha YZ250 Owner's Service Manual page 124

1 Clamp
2 High tension cord
3 C.D.I.unit
4 "ENGINE STOP" button lead
5 Ignition coil lead
6 Radiator hose
7 Radiator breather hose
8 Throttle cable
9 Clutch cable
0 Wireharness
CABLE ROUTING DIAGRAM
A Clamp the wireharness to the
right engine bracket.
B Pass the high tension cord to
the right of the radiator hose.
C Pass the C.D.I. unit lead
between the frame and the right
side of the radiator and then
above the radiator fitting boss.
D Pass the radiator breather hose
behind the radiator hose.
E Locate the clamp ends in the
arrowed range.
F Insert the C.D.I. unit band until it
stops at the C.D.I. unit stay.
2-16
SPEC