Installing The Driver For A Cna Card For Fcoe, Iscsi, And Nic Protocols; Installing The Driver For The Qle2672 Hba Card - Lenovo ThinkServer TD350 Operating System Installation Manual

1. Download the driver for the LPe16002B HBA card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /elx-lpfc-dd-sles11sp-10.2.185.0
./elx_lpfc_install.sh
Note: In the command lines, elx-lpfc-dd-sles11sp-10.2.185.0 represents the name of the folder that
the drive is stored. elx_lpfc_install.sh represents the driver name. Use the corresponding file name
on your server.
4. Restart your server.

Installing the driver for a CNA card for FCoE, iSCSI, and NIC protocols

This topic provides instructions on installing drivers for the following CNA cards:
• OCe14102
• OCe14401
To install the driver for a CNA card for FCoE, iSCSI, and NIC protocols, do the following:
1. Download the driver for a CNA card from the Lenovo Web site. If the driver is a compressed file,
unzip it to a folder. Then, copy the folder to your USB storage device and connect the USB storage
device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /elx-lpfc-dd-sles11sp-10.2.185.0
./elx_lpfc_install.sh
Note: In the command lines, elx-lpfc-dd-sles11sp-10.2.185.0 represents the name of the folder that
the drive is stored. elx_lpfc_install.sh represents the driver name. Use the corresponding file name
on your server.
4. Restart your server.

Installing the driver for the QLE2672 HBA card

To install the driver for the QLE2672 HBA card, do the following:
1. Download the driver for the QLE2672 HBA card from the Lenovo Web site. If the driver is a compressed
file, unzip it to a folder. Then, copy the folder to your USB storage device and connect the USB storage
device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
cd /tmp
cd /driver
./extras/build.sh install
Note: In the command lines, driver represents the name of the folder that the drive is stored. build.sh
represents the driver name. Use the corresponding file name on your server.
.
Chapter 4 Installing drivers
49