Lenovo ThinkServer TD350 Operating System Installation Manual page 40

10. Personalize the server by typing the root password for the root user account. Then, click Next.
Note: If a message prompts you that the password is weak, click Use Anyway.
11. By default, a partition is already selected for you to install the operating system. If you want to create a
partition manually, select the option as you need and then click Next.
Note: The following steps are based on the scenario that Create Custom Layout is selected in this step.
12. In the Please Select A Device window, create a partition as you need and then click Next. The following
steps are based on the scenario that a 20 GB root partition, a 1024 MB boot partition, and a 1024 MB
swap partition are created.
• To create a drive partition, do the following:
a. Click Create and select Standard Partition. Click Create.
b. In the Add Partition window, select the forward slash / from the Mount Point drop-down list box.
c. Select ext4 from the File System Type drop-down list box.
d. In the Allowable Drivers area, select the hard disk drive for operating system installation as you
need. The following steps are based on the scenario that sda is selected in this step.
e. In the Size (MB) area, type 20000 and then click OK. The root partition is created.
f. Go back to the partition window. Click Create and select Standard Partition. Click Create.
g. In the Add Partition window, select the forward slash /boot/efi from the Mount Point drop-down
list box.
h. Select EFI System Partition from the File System Type drop-down list box.
i. In the Allowable Drivers area, select the hard disk drive for operating system installation as you
need. The following steps are based on the scenario that sda is selected in this step.
j. In the Size (MB) area, type 1024 and then click OK. The boot partition is created.
k. Go back to the partition window. Click Create and select Standard Partition. Click Create.
l. In the Add Partition window, select the forward slash swap from the Mount Point drop-down
list box.
m. In the Allowable Drivers area, select the hard disk drive for operating system installation as you
need. The following steps are based on the scenario that sda is selected in this step.
n. In the Size (MB) area, type 1024 and then click OK. The boot partition is created.
o. Go back to the partition window. Ensure that the drive partition is correct and then click Next.
Note: If the Format Warnings window is displayed, click Format.
13. In the Writing storage configuration to disk window, click Write changes to disk.
14. In the Boot loader operating system list window, click Next.
15. The default installation is a basic server installation. You can customize your server by selecting
different software from the software list or adding additional repositories that you want to use for the
software installation. The following steps are based on the scenario that Customize now is selected in
this step. Then, click Next.
Notes:
• If the Warning window is displayed, configure the settings as you need. The following steps are
based on the scenario that you select Continue.
• Do not select tboot-1.7.4–1.el6.x86_64 - Performs a verified launch using Intel TXT in the
software list.
16. After the installation is completed, click Reboot to restart your server.
36
ThinkServer TD350 Operating System Installation Guide