Installing Drivers For The Pmc 8885E; Installing Drivers For The Suse Linux Enterprise Server 11 Operating System With Service Pack; Installing The Driver For An Onboard Graphics Card; Copy The Folder That Contains The Driver To Your Usb Storage Device And Connect The Usb Storage Device To Your Server - Lenovo ThinkServer TD350 Operating System Installation Manual

Installing drivers for the PMC 8885e

To install the driver for the PMC 8885e, do the following:
1. Download the corresponding driver from the Lenovo Web site. If the driver is a compressed file, unzip it
to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage
device to your server.
3. Use the Pnputil-i-a <driverinf> command to install the driver, for example:
e:
cd Management
Pnputil –i –a arcsas.inf
Note: In the command lines, e: represents the drive letter of your USB storage device, Management
represents the subdirectory where your driver is located, and arcsas.inf represents the driver name.
Use the corresponding file name on your server.
4. Restart your server after the installation is completed.
Installing drivers for the SUSE Linux Enterprise Server 11 operating
system with Service Pack 3
To install drivers for the SUSE Linux Enterprise Server 11 operating system with Service Pack 3, refer to
the related topics.
• "Installing the driver for an onboard graphics card" on page 47
• "Installing the driver for an Ethernet card" on page 48
• "Installing the driver for the LPe16002B HBA card" on page 48
• "Installing the driver for a CNA card for FCoE, iSCSI, and NIC protocols" on page 49
• "Installing the driver for the QLE2672 HBA card" on page 49
• "Installing the driver for a RAID card" on page 50
• "Installing the driver for the PMC 8885e" on page 50
Note: Your server comes with a chipset driver pre-installed. You do not need to install the chipset driver
manually.

Installing the driver for an onboard graphics card

To install the driver for an onboard graphics card, do the following:
1. Download the driver for the onboard graphics card from the Lenovo Web site. If the driver is a
compressed file, unzip it to a folder. Then, copy the folder to your USB storage device and connect
the USB storage device to your server.
2. Log in to the operating system and copy the folder from your USB storage device to the /tmp directory
on your server.
3. Use the following commands to install the driver:
• For the file with the .sh extension:
cd /tmp
cd lxdrv-1-
./update.sh
.
Chapter 4 Installing drivers
47