Installing The Driver For Usb 3.0 Connectors; Installing The Driver For The Lpe16002B Hba Card; Open The Folder That Contains The Driver And Double-Click The Setup File. The Welcome To The Setup Program Window Is Displayed; Click Next. The License Agreement Window Is Displayed - Lenovo ThinkServer TD350 Operating System Installation Manual

Installing the driver for USB 3.0 connectors

This topic provides instructions on installing the driver for the USB 3.0 connectors for the following operating
systems:
• Microsoft Windows Server 2008 R2 with Service Pack 1 (x64)
• Microsoft Windows Small Business Server 2011 (x64)
Notes: For the following operating systems, the driver for USB 3.0 connectors comes with the server system:
• Microsoft Windows Server 2012 (x64)
• Microsoft Windows Server 2012 R2 (x64)
• Microsoft Windows Storage Server 2012 (x64)
• Microsoft Windows Multipoint Server 2012 (x64)
To install the driver for USB 3.0 connectors, do the following:
1. Download the driver for USB 3.0 connectors from the Lenovo Web site. If the driver is a compressed file,
unzip it to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage
device to your server.
3. Open the folder that contains the driver and double-click the setup file. The Welcome to the Setup
Program window is displayed.

4. Click Next. The License Agreement window is displayed.

5. Click Yes. The Readme File Information window is displayed.

6. Click Next. The Setup Progress window is displayed.

7. Click Next. The Setup Is Complete window is displayed.

8. Click Finish. The installation is completed. It is recommended to restart your computer after driver

installation.

Installing the driver for the LPe16002B HBA card

To install the driver for the LPe16002B HBA card, do the following:
1. Download the driver for the HBA card from the Lenovo Web site. If the driver is a compressed file, unzip
it to a folder. The most up-to-date device drivers for various server models are always available for
download on the Lenovo Web site at:
http://www.lenovo.com/drivers
2. Copy the folder that contains the driver to your USB storage device and connect the USB storage
device to your server.
3. Open the folder that contains the driver and double-click the setup file.
4. When the Click Next to continue window is displayed, click Next.
5. In the Installation options window, select your desired option and then click Install.
6. In the Installation completed window, select your desired option. The following steps are based on the
scenario that Start AutoPilot Installer is selected in this step.
7. Click Finish.
8. In the EMULEX window, click Next. The Monitoring the Installation window is displayed, the installation
process starts.
9. When the Congratulations! Installation completed successfully window is displayed, click Finish.
.
Chapter 4 Installing drivers
41