Hailer Fog Intercom Menu; Loud Hailer - Ray70 - Raymarine RAY50 Installation And Operation Instructions Manual

9.1 Hailer Fog Intercom menu

The menu options available are determined by the
device connected to your radio.
Menu name
Hail/Fog/Int
Hailer/Fog
Intercom
Note: For simplicity the procedures in this section
all refer to the Hail/Fog/Int menu.
76
Connected devices
Loud hailer and second
station connected.
Loud hailer connected, no
second station
Second station connected, no
loud hailer
9.2 Loud Hailer — Ray70
The Ray70 can be connected to a Loud hailer.
In hailer mode anything spoken into the handset is
amplified and broadcast from the hailer, the message
is not transmitted over VHF channels.
When the hailer is active VHF calls cannot be sent
or received.
Using the hailer
From the Hail/Fog/Int menu: Menu > Hail/Fog/Int.
1. Select Hailer.
Hailer mode is now active
2. Press and hold the PTT button.
3. Speak your message.
4. Release the PTT button.
5. Press the Back button to exit Hailer mode.
6. The hailer listening volume can be adjusted at
any time in Listening mode using the Volume
Control.
7. The hailer talking volume can be adjusted at
any time, with the PTT button pressed using the
Volume Control.
Ray50 / Ray60 / Ray70