Fistmic Connection Ray60 / Ray70 - Raymarine RAY50 Installation And Operation Instructions Manual

4.6 Fistmic connection Ray60 / Ray70

The Fistmic should primarily be connected to the
front Fistmic connector. Using an adaptor cable the
Fistmic can be connected to the rear second station
connector, this is useful when the Fistmic is required
to be slightly farther away from the base station than
the Fistmic's cable allows.
The Fistmic must not be used as a second station
as it will not be fully functional or have access to
displayed important information.
Fistmic front connection
1
1. Fistmic
2. Base station
Fistmic rear connection
1
1. Base station
2. Fistmic
3. Raymic handset extension cable (A80291)
4. Fistmic adaptor cable (A80296)
32
Connecting the Fistmic – Ray60 / Ray70
The Fistmic can be connected directly to the
connector on the front of the unit.
2
D13298-1
1. Ensure the Fistmic cable connector is correctly
orientated.
2. Fully insert the connector into the connector on
the front of the unit.
3. Rotate the locking collar clockwise until it clicks.
D13299-1
D13217-1
Ray50 / Ray60 / Ray70