Set-Up Menu Options - Raymarine RAY50 Installation And Operation Instructions Manual

8.8 Set-up menu options

The Set-up menu options can be accessed from the menu.
Menu
Display set-up
Language
Units
Power output
Sensitivity
Noise cancelling (Tx)
Key Beep
Channel set-up
GPS set-up
DSC set-up
AIS
Network output
72
Description
Provides access to the display settings
menu
Enables selection of user interface
language.
Provides access to units of measure
related settings
Enables you to switch the Power output
of the radio.
Enables you to switch the Sensitivity of
the radio.
Enables you to switch the transmission
noise cancellation feature On and Off.
Note: Only available on Ray60 and
Ray70.
Enables adjustment of the beep heard
when pressing buttons.
Provides access to the Channel set-up
menu.
Provides access to the GPS set-up menu. • Internal GPS
Provides access to the DSC set-up menu. • MMSI
Enables you to switch the Ray70's
internal AIS receiver on and off.
Enables you to select the network to be
used to output data.
Options
• Backlight
• Shared brightness
• Contrast
• Homescreen display
• English (default) — English
• Español — Spanish
• Français — French
• Deutsch — German
• Italiano — Italian
• Time format
• Time offset
• Bearing mode
• Speed unit
• Distant (default)
• Local
• Low
• High (default)
• On (default)
• Off
• Off
• Quiet (default)
• Loud
• Channel name
• 2nd priority channel
• Private channels
• Frequency band
• Homescreen display
• Bearing mode
• Position requests
• Set manual position
• Auto channel change
• Position requests
• Off (default)
• On
• NMEA 2000
• 0183 High speed
• 0183 Std speed
Ray50 / Ray60 / Ray70