Chapter 6 Getting Started - Raymarine RAY50 Installation And Operation Instructions Manual

Chapter 6: Getting started
Chapter contents
• 6.1 Controls and interface on page 44
• 6.2 Powering the unit on on page 44
• 6.3 Powering the unit off on page 45
• 6.4 Homescreen overview on page 45
• 6.5 Shortcut list on page 47
• 6.6 Initial startup on page 48
• 6.7 Accessing the menu on page 48
• 6.8 Selecting a language on page 49
• 6.9 Switching on the AIS receiver - Ray70 on page 49
• 6.10 Selecting a network type on page 50
• 6.11 Entering your MMSI number on page 50
• 6.12 Enabling and disabling ATIS mode on page 51
• 6.13 Entering your ATIS ID on page 52
• 6.14 Changing the radio region on page 53
• 6.15 Adjusting the display brightness on page 53
• 6.16 Adjusting the display contrast on page 54
• 6.17 Switching between high and low transmit power on page 54
• 6.18 GPS/GNSS setup on page 55
• 6.19 Station priority - Ray60 and Ray70 on page 56
Getting started
43