8.7 AIS — Ray70
The Ray70 has a built in AIS receiver.
With the built-in AIS receiver switched on AIS
information can be sent to a connected Raymarine
MFD using either NMEA 0183 or SeaTalk
Note: If using the built-in AIS receiver and
outputting over NMEA 0183, ensure that the baud
rate is set to 0183 High speed: Menu > Set-up >
Network output .
Switching AIS on and off
From the Set-up menu: Menu > Set-up.
1. Select AIS.
Selecting AIS will switch the internal AIS receiver
On and Off.
VHF operations
®
ng®
.
71