Panasonic KX-NCP1000 Programming Manual page 14

2.1.1 Installing and Starting the Maintenance Console
8. On the IP addressing information screen, the information for the IPCMPR card can be assigned
automatically through a DHCP server or entered manually.
Note
If you change any information on this screen and click Apply, the PBX will need to be reset.
When using a DHCP server:
a.
Select Enable for the DHCP Client setting.
b.
Click Apply.
Note
The boxes will turn grey and the IP addresses will be assigned automatically after the PBX is
reset.
When not using a DHCP server:
a.
Select Disable for the DHCP Client setting.
b.
In the IP Address for IPCMPR Card box, type the IP address of the IPCMPR card.
c.
In the IP Address for VoIP-DSP box, type the IP address of the DSP card.
d.
In the Subnet Mask box, type the subnet mask address of the network.
e.
In the Default Gateway box, type the IP address of the default gateway.
f.
Click Apply.
When using a DHCP server to obtain a DNS server IP address automatically:
a.
Select DHCP for the DNS Server Address Method setting.
b.
Click Apply.
Note
The boxes will turn grey and the IP addresses will be assigned automatically after the PBX is
reset.
14 Programming Manual for Virtual SIP CO Line Card
*1
*2
*3
*4
Document Version 2009-12